Some of the more common U.S. types of bottled water are listed below:
• Artesian Water – The purest of waters, this type of water originates from a
confined aquifer that has been tapped. Artesian water flows from the tap due to
gravity; the subterranean water level is at a height greater than that of the location
of the tap.
• Ground Water – This type of water is from an underground source that is under a
pressure equal to or greater than atmospheric pressure. This is the water
responsible for lubricating underground faults.
• Mineral Water – This type of water contains at least 250 parts per million total
dissolved solids (TDS). It comes from a source tapped at one or more bore holes
or spring, and originates from a geologically and physically protected
underground water source. No minerals may be added to this water.
• Purified water – This type of water has been produced by distillation,
deionization, reverse osmosis, or other suitable processes. Purified water may also
be referred to as “demineralized water.”
• Sparkling Water – This type of water contains the same amount of carbon
dioxide that it had at emergence from the source. The carbon dioxide may be
removed and replenished after treatment.
• Spring Water – This type of water comes from an underground formation from
which water flows naturally to the Earth’s surface.
• Well Water – This type of water is mechanically taken from a man-made
Error: Twitter did not respond. Please wait a few minutes and refresh this page.
- October 2014
- September 2014
- August 2014
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- April 2011
- March 2011